Products List
Contact Us

Add:No.110,Liguang New Industrial Zone,Guanlan Street,Longhua New District,Shenzhen

Contact:

Abbie Chow / Shadow Hsiung

Tel:

(0086)755-8379-9309

(0086)755-8297-1183

Fax:

(0086)755-8297-5415/888

Mob:

(0086)178-2039-5231

(0086)135-9029-8041

E-mail:015@kw-link.net

Web: www.cablekw.com

Our service hotline
(0086)755-8297-1183

Exhibition

Home > ExhibitionContent

China Professional Manufacturer UTP Cat6 Lan Cable

Shenzhen KW-LINK Electronic Co.,Ltd | Updated: Nov 10, 2016


China Professional Manufacturer UTP Cat6 Lan Cable


Specialization: 

 

* Unshielded twisted pairs

* AWG: 24/26/28AWG  Optional

* Conductor: Stranding or Solid CCAM/CCA/CCU/CU/ Bare copper available

* Insulation: HD—PE

* Unrip rope: optional

* Jacket: PVC or LSNH

* Impedance: 100±15% O at 1 ~100MHz

* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801

* Print Legend: CM or CMR

 

* Specification: 4P

 

* Rated Temperature: -40°C ~ + 75°C

 

 

 Diameter of Cable

 

Conductor

Insulation

Core Number

Jacket

AWG

Specification

mm

Material

Thickness

(NOM.mm)

Material

Thickness

(NOM.mm)

 OD

(NOM.mm)




24

1/0.511

HD-PE

0.18

4P

PVC or LSNH

0.55

5.4


26

1/0.404

HD-PE

0.18

4P

PVC or LSNH

0.55

5.0


 

 

Scope Application:

 

Mainly used in the Building Correspondence Synthesis Wiring System the Work Area Correspondence Leading-out Terminal and between the Connection Distribution Frame Wiring, As Well As the Housing Synthesis Wiring System’s User Correspondence Leading-out Terminal Arrives at Place of Exile between Coils’ wiring.

 



         Network cabling, in whatever "Category," is at root a simple paired-conductor cable design. Signals are sent down each data pair, and the two wires in the pair are twisted together to improve noise rejection and to ensure that they have very similar length; these are important aspects of the cable because signals are sent in a "differential mode" where neither wire is grounded and the receiving circuit has to measure the difference in voltage between the two wires in the pair. Good control over twisting results in excellent "common mode" noise rejection, where noise which affects each conductor equally effectively disappears from the signal, and control over lengths is important both to common mode noise rejection and to keeping the signal from falling apart due to intrapair skew (this is not the "skew" you are likeliest to be familiar with--it's the difference in timing between the two wires in the pair). Because the frequencies involved here are high, the dimensions of the pairs, and their spacing and relationship to other pairs in the bundle, are all important. These attributes of the cable affect its characteristic impedance, which must be kept as stable as possible to prevent signal degradation, because impedance variations cause portions of the signal to reflect within the cable or connector.